中英文双语版16G101-1 |
 |
| 标准编号：B16G101-1 |
标准状态：已作废 |
|
| 标准价格：292.0 元 |
客户评分：  |
|
|
立即购买工即可享受本标准状态变更提醒服务！ |
|
|
|
|
|
16G101-1 Drawing Rules and Standard Detailing Drawings of Ichnographic Representing Method for Construction Drawings of R.C. Structures (Cast-in-situ R.C. frames, shear walls, beams and slabs) is the revised version of 11G101-1 Drawing Rules and Standard Detailing Drawings of Ichnographic Representing Method for Construction Drawings of R.C. Structures (Cast-in-situ R.C. frames, shear walls, beams and slabs). According to the updated versions of codes GB 18306-2015 Seismic Ground Motion Parameters Zonation Map of China, GB50011-2010 Code for Seismic Design of Buildings and its partial revision in 2016 and GB50010-2010 Code for Design of Concrete Structures (2015 version) et al., considering feedbacks from engineering practice and need of practical projects in recent years, contents in the drawing collection have been systematically revised, and details of frame flat beams are included in this version.
This drawing collection is applicable to construction drawing design of main structure in all kinds of cast-in-situ R.C. structures in seismic design with seismic precautionary intensity 6~9, such as frame structures, shear wall structures, frame-shear wall structures and partial frame-supported shear wall structures, and is also applicable to cast-in-situ R.C. slabs (with and without beams) as well as cast-in-situ R.C. walls, columns, beams and slabs of basement structures.
There are two parts in this drawing collection: drawing rules of IRM and standard detailing drawings of structural members above top of the foundation, such as cast-in-situ R.C columns, shear walls, beams and slabs (with or without beams). |
|
|
|
| 英文名称： |
Drawing Rules and Stand? ard Detailing Drawings of Ichnographic Representing Method for Construction Drawings of R. C. Struc? tures (Cast - in - situ R. C. Frames,Shear Walls, Beams and Slabs) |
| 标准状态： |
已作废 |
 替代情况： |
替代11G101-1英文版 |
| 发布部门： |
中华人民共和国住房和城乡建设部 |
| 作废日期： |
2022-05-01
|
|
|
|
Contents 1
General Instruction 5
Part One Drawing Rules of Ichnographic Representing Method
1 General Provisions 6
2 Rules of Ichnographic Construction Drawings of Columns 8
2.1 Representing method of ichnographic construction drawings of columns 8
2.2 Tabulated annotation method 8
2.3 Sectional annotation method 10
2.4 Others 10
Example of ichnographic construction drawings of columns using tabulated annotation method 11
Example of ichnographic construction drawings of columns using sectional annotation method 12
3 Rules of Ichnographic Construction Drawings of Shear Walls 13
3.1 Representing method of ichnographic construction drawings of shear walls 13
3.2 Tabulated annotation method 13
3.3 Sectional annotation method 17
3.4 Representing method of openings in shear walls 18
3.5 Representing method of exterior walls of basement 19
3.6 Others 21
Example of ichnographic construction drawings of shear walls using tabulated annotation method 22
Example of ichnographic construction drawings of shear walls using sectional annotation method 24
Example of ichnographic construction drawings of exterior walls of basement using ichnographic annotation method 25
4 Rules of Ichnographic Construction Drawings of Beams 26
4.1 Representing method of ichnographic construction drawings of beams 26
4.2 Ichnographic annotation method 26
4.3 Sectional annotation method 34
4.4 Requirements for length of top longitudinal bars in beams at support 35
4.5 Requirements for length of bottom bars in beams cut off in span 35
4.6 Others 35
Example of ichnographic construction drawings of beams using ichnographic annotation method 37
Example of ichnographic construction drawings of beams using sectional annotation method 38
5 Rules of Ichnographic Construction Drawings of Slabs with Beams 39
5.1 Representing method of ichnographic construction drawings of slabs with beams 39
5.2 General annotation of slabs 39
5.3 Specific annotation of slabs at support 40
5.4 Others 43
Example of ichnographic construction drawings of slabs with beams 44
6 Rules of Ichnographic Construction Drawings of Slabs without Beams 45
6.1 Representing method of ichnographic construction drawings of slabs without beams 45
6.2 General annotation of slab strips 45
6.3 Specific annotation of slab strips at support 45
6.4 Representing method of embedded beams 46
6.5 Others 47
Example of ichnographic construction drawings of slabs without beams 48
7 Rules for Drawings of Slab-related Detailing 49
7.1 Types and the representing method of slab-related detailing 49
7.2 Direct annotation of slab-related detailing 49
7.3 Others 55
Part Two Standard Detailing Drawings
Environment classification of concrete structures Minimum concrete cover 56
Basic anchorage length lab, basic anchorage length labE of tension bars in seismic design and the inside diameter of hook D 57
Anchorage length la of tension bars Anchorage length laE of tension bars in seismic design 58
Hooks and mechanical anchorage types of longitudinal bars Stirrup detailing in the lap zone of longitudinal main bars Splices of longitudinal bars 59
Lap length ll of longitudinal tension bars 60
Lap length llE of longitudinal tension bars in seismic design 61 |
|
|
|
| |
|
客服中心 |
| 有问题？找在线客服 |
 |
|
|
|
|
温馨提示：标准更新替换较快，请注意您购买的标准时效性。 |
|
|
|
|
| 必备软件下载 |
| Adobe Acrobat Reader 是一个查看、
阅读和打印PDF文件的最佳工具，通
过它可以查阅本站的标准文档 |
 |
|
|
|