该标准是在SY/T 6058-94 《自升式井架起放作业规程》的基础上修改而成的,由新疆石油管理局钻井公司起草,规定了陆地钻机自升式井架起放作业的检查、起升和下放技术要求及特殊规定,适用于使用人字架起放方式的ZJ10、ZJ20、ZJ30、ZJ40、ZJ50、ZJ70钻机级别自升式井架的起放作业;本标准不适用于各类液压起升钻机的起放作业。
该标准与SY/T 6058-94 相比,主要变化如下:
——变更了使用范围; ——删除了表1和图1的内容; ——增加了使用液压缓冲器的相关内容; ——增加了底座起放的相关内容。
主要描述了:
(1)井架起放前的检查与要求 ①井架及底座 ②动力及控制部分 ③井架起升系统 ④场地
(2)井架起升 ①井架试起升 ②井架起升作业 ③底座起升作业
(3)井架下放 ①井架下放作业 ②底座下放作业
(4)起放井架的特殊要求
SY/T 6058-2004 Operation procedures for lifting and laying down of self-electing mast
The standard is the revision of SY/T 6058-94 Lifting and laying down operation procedure for self-erection mast, was drafted by the Drilling Company of Xin Jiang Petroleum Administration Bureau, specifies the technical requirements, special regulations on the inspection, lifting and laying down of self-erection mast of land rig, and is applicable to the lifting and laying down operations of self-erection masts. Which lifted and laid down via A-frames of substructure of ZJ-10, ZJ-20, ZJ-30, ZJ-40, ZJ-50 and ZJ-70.
The standard will replace the standard SY/T 6058-94 from the implementation date of this standard, main changes made in the standard are as follows: ——The scope is modified; ——Table 1 and drawing 1 are deleted; ——The content relevant to the application of hydraulic damper is added; ——The content relevant to the lifting and laying down of the substructure is added.
Key components: (1)Inspection and requirements before lifting and laying down ①Mast and substructure ②Power and control system ③Mast lifting system ④Well site
(2)Mast lifting ①Test lifting ②Mast lifting operation ③Substructure lifting operation
(3)Mast laying down ①Mast laying down operation ②Substructure lowering operation
(4)The special requirements for mast lifting and laying down operation
|