| 序号 |
标准编号 |
标准名称 |
行业标准外文名称 |
出版机构 |
| 1 |
NB/T 20005.7-2017 |
压水堆核电厂用碳钢和低合金钢 第7部分：1、2、3级钢板 |
Carbon
steel and low alloy steel for pressurized water reactor nuclear
power plants-Part 7: Class 1, 2, 3 plates |
原子能出版社 |
| 2 |
NB/T 20007.11-2013 |
压水堆核电厂用不锈钢 第11部分：用填充金属焊接的1、2、3级奥氏体不锈钢钢管 |
Stainless
steel for pressurized water reactor nuclear power plants-Part 11:
Class 1, 2 and 3 austenitic stainless steel pipes welded with filler
metal |
原子能出版社 |
| 3 |
NB/T 20007.12-2013 |
压水堆核电厂用不锈钢 第12部分：用填充金属焊接的1、2、3级奥氏体对焊不锈钢管件 |
Stainless
steel for pressurized water reactor nuclear power plants-Part 12:
Class 1, 2 and 3 austenitic stainless steel butt-welding pipe
fittings welded with filler metal |
原子能出版社 |
| 4 |
NB/T 20007.52-2018 |
压水堆核电厂用不锈钢 第52部分：安全级设备用奥氏体不锈钢棒和型钢 |
Stainless
steel for pressurized water reactor nuclear power plants-Part 52:
Austenitic stainless steel bars and sections for safety related
components |
原子能出版社 |
| 5 |
NB/T 20549-2019 |
核安全相NB/T 关混凝土结构耐久性设计规范 |
Code for
durability design of nuclear safety related concrete structure |
原子能出版社 |
| 6 |
NB/T 20571-2019 |
压水堆核电厂变频屏蔽主泵调试技术导则 |
Commissioning technical guideline for variable frequency
canned-motor reactor coolant pump of PWR nuclear power plant |
原子能出版社 |
| 7 |
NB/T 20573-2019 |
压水堆核电厂主蒸汽隔离阀调试技术导则 |
Commissioning technical guideline for main steam isolation valve of
PWR nuclear power plant |
原子能出版社 |
| 8 |
NB/T 20552-2019 |
压水堆核电厂堆芯临界硼浓度监督 |
Supervision of critical boron concentration in core at pressurized
water reactor nuclear power plants |
原子能出版社 |
| 9 |
20560.6-2019 |
压水堆核电厂应急堆芯冷却系统过滤器设计和性能评价 第6部分：化学效应试验技术要求 |
Design
and performance evaluation of emergency core cooling system strainer
for pressurized water reactor nuclear power plant-Part 6: Technical
requirements for chemical effects testing |
原子能出版社 |
| 10 |
NB/T 20006.18-2019 |
压水堆核电厂用合金钢 第18部分：反应堆压力容器整体顶盖用锰-镍-鉬合金钢锻件 |
Alloy
steel for pressurized water reactor nuclear power plants-Part 18:
Mn-Ni-Mo alloy steel forgings for closure heads of reactor pressure
vessel |
原子能出版社 |
| 11 |
NB/T 20006.19-2019 |
压水堆核电厂用合金钢 第19部分：反应堆冷却剂泵泵壳用锰-镍-钼合金钢锻件 |
Alloy
steel for pressurized water reactor nuclear power plants-Part 19:
Mn-Ni-Mo alloy steel forgings for reactor coolant pumpcasings |
原子能出版社 |
| 12 |
NB/T 20562-2019 |
控制棒驱动机构耐压壳密封焊缝无损检测 |
Non-destructive testing for pressure housing seal weld of control
rod drive mechanism |
原子能出版社 |
| 13 |
NB/T 20009.1-2010 |
压水堆核电厂用焊接材料 第1部分：1、2、3级设备用碳钢焊条 |
Welding
material for pressurized water reactor nuclear power plants-Part 1:
Carbon steel covered electrodes for class 1, 2, 3 components |
原子能出版社 |
| 14 |
NB/T 20009.2-2010 |
压水堆核电厂用焊接材料 第2部分：1、2、3级设备用低合金钢焊条 |
Welding
material for pressurized water reactor nuclear power plants-Part 2:
Low alloy steel covered electrodes for Class 1, 2, 3 components |
原子能出版社 |
| 15 |
NB/T 20009.3-2010 |
压水堆核电厂用焊接材料 第3部分：1、2、3级设备用不锈钢焊条 |
Welding
material for pressurized water reactor nuclear power plants-Part
3:Stainless steel covered electrodes for Class 1,2,3 components |
原子能出版社 |
| 16 |
NB/T 20009.4-2013 |
压水堆核电厂用焊接材料 第4部分：1、2、3级设备用镍基合金焊条 |
Welding
material for pressurized water reactor nuclear power plants-Part
4:Nickel-based alloy covered electrodes for class 1,2,3 components |
原子能出版社 |
| 17 |
NB/T 20009.5-2013 |
压水堆核电厂用焊接材料 第5部分：1、2、3级设备用碳钢气体保护电弧焊药芯焊丝 |
Welding
material for pressurized water reactor nuclear power plants-Part 5:
Carbon steel flux cored electrodes for gas shielded arc welding of
class 1, 2, 3 components |
原子能出版社 |
| 18 |
NB/T 20009.6-2012 |
压水堆核电厂用焊接材料 第6部分：1、2、3级设备用碳钢气体保护电弧焊焊丝 |
Welding
material for pressurized water reactor nuclear power plants-Part 6:
Carbon steel electrodes and rods for gas shielded arc welding of
class 1, 2, 3 components |
原子能出版社 |
| 19 |
NB/T 20009.7-2012 |
压水堆核电厂用焊接材料 第7部分：1、2、3级设备用不锈钢焊丝和填充丝 |
Welding
material for pressurized water reactor nuclear power plants-Part
7：Stainless steel wires and filler rods for class 1,2,3 components |
原子能出版社 |
| 20 |
NB/T 20009.8-2012 |
压水堆核电厂用焊接材料 第8部分：1、2、3级设备用镍基合金焊丝和填充丝 |
Welding
material for pressurized water reactor nuclear power plants-Part 8:
Nickel-based alloy wires and filler rods for class 1,2,3 components |
原子能出版社 |
| 21 |
NB/T 20009.9-2013 |
压水堆核电厂用焊接材料 第9部分：1、2、3级设备埋弧焊用碳钢焊丝和焊剂 |
Welding
material for pressurized water reactor nuclear power plants-Part 9:
Carbon steel wires and fluxes for submerged arc welding of class 1,
2, 3 components |
原子能出版社 |
| 22 |
NB/T 20009.10-2013 |
压水堆核电厂用焊接材料 第10部分：1级设备埋弧焊用低合金钢焊丝和焊剂 |
Welding
material for pressurized water reactor nuclear power plants-Part
10：Low alloy steel welding wire and flux for submerged arc welding
of class 1 components |
原子能出版社 |
| 23 |
NB/T 20009.11-2013 |
压水堆核电厂用焊接材料 第11部分：1、2、3级设备埋弧焊用不锈钢焊丝和焊剂 |
Welding
material for pressurized water reactor nuclear power plants-Part
11：Stainless steel wires and fluxes for submerged arc welding of
class 1,2,3 components |
原子能出版社 |
| 24 |
NB/T 20009.12-2013 |
压水堆核电厂用焊接材料 第12部分：1级设备镍基合金堆焊用焊带和焊剂 |
Welding
material for pressurized water reactor nuclear power plants-Part 12:
Nickel-based alloy strip cladding with flux for class 1 components
|
原子能出版社 |
| 25 |
NB/T 20009.13-2013 |
压水堆核电厂用焊接材料 第13部分：1、2、3级设备不锈钢堆焊用焊带和焊剂 |
Welding
material for pressurized water reactor nuclear power plants-Part
13：Stainless steel strips and fluxes for cladding of class 1,2,3
components |
原子能出版社 |
| 26 |
NB/T 20009.14-2013 |
压水堆核电厂用焊接材料 第14部分：1、2、3级设备用硬质合金堆焊焊接材料 |
Welding
material for pressurized water reactor nuclear power plants-Part 14:
Hard facing welding consumables for class 1,2,3components |
原子能出版社 |
| 27 |
NB/T 20224-2013 |
压水堆核电厂控制棒驱动机构设计制造规范 |
Design
and manufacture specification of control rod drive mechanism of
pressurized water reactor for nuclear power plant |
原子能出版社 |
| 28 |
NB/T 20343-2015 |
压水堆核电厂反应堆压力容器及反应堆冷却剂系统管道和设备保温层设计制造规范 |
Design
and fabrication specification for the thermal insulation of reactor
vessel and reactor coolant pipings and equipments of PWR nuclear
power plants |
原子能出版社 |
| 29 |
NB/T 20275-2014 |
压水堆核电厂螺柱焊接规范 |
Stud
welding specification for pressurized water reactor nuclear power
plants |
原子能出版社 |
| 30 |
NB/T 20277-2014 |
A240（S32101）双相不锈钢焊接规范 |
Welding
specification for A240 (S32101) duplex stainless steel |
原子能出版社 |
| 31 |
NB/T 20292-2014 |
核电厂用铁素体钢韧脆转变区参考温度T0的测试方法 |
Test
method for determination of reference temperature, T0, for ferritic
steels in the ductile-to-brittle transition range for nuclear power
plants |
原子能出版社 |
| 32 |
NB/T 20436-2017 |
压水堆核电厂水化学控制 |
Water
chemistry for pressurized water reactor nuclear power plant |
原子能出版社 |
| 33 |
NB/T 20439-2017 |
压水堆核电厂反应堆压力容器压力-温度限值曲线制定准则 |
Evaluation rules of pressure-Temperature limit curves for reactor
pressure vessel of pressurized water reactor nuclear power plants
|
原子能出版社 |
| 34 |
NB/T 20440-2017 |
压水堆核电厂反应堆压力容器防止快速断裂评定准则 |
Assessment criteria for preventing fast rupture of reactor pressure
vessel of pressurized water reactor nuclear power plants |
原子能出版社 |
| 35 |
NB/T 20319-2014 |
压水堆核电厂技术规格书编制准则 |
Compiling
criteria for technical specification for pressurized water reactor
nuclear power plant |
原子能出版社 |
| 36 |
NB/T 20157-2012 |
核电工程施工质量保证规定 |
Quality
assurance requirements for construction of nuclear power project |
原子能出版社 |
| 37 |
NB/T 20305-2014 |
重水堆核电厂热传输支管老化管理指南 |
Aging
management guideline for feeders of pressurized heavy water nuclear
power plants |
原子能出版社 |
| 38 |
NB/T 20527-2018 |
重水堆核电厂一回路管道流动加速腐蚀管理指南 |
Flow
accelerated corrosion management guideline for primary loop piping
of pressurized heavy water reactor nuclear power plants |
原子能出版社 |
| 39 |
NB/T 20392-2016 |
非能动压水堆核电厂压力容器安装及验收技术规程 |
Technical
regulation for construction and acceptance of reactor vessel
installation in passive PWR nuclear power plant |
原子能出版社 |
| 40 |
NB/T 20377-2016 |
非能动压水堆核电厂蒸汽发生器安装技术规程 |
Technical
specification for installation of passive PWR steam generator |
原子能出版社 |
| 41 |
NB/T 20453-2017 |
非能动压水堆核电厂主冷却剂管道安装技术规程 |
Technical
regulation for installation of primary reactor coolant piping in
passive pressurized water reactor nuclear power plant |
原子能出版社 |
| 42 |
NB/T 20273-2014 |
压水堆核电厂放射性疏水和排气设计准则 |
Design
criteria of radioactive drain and vent for PWR nuclear power plant |
原子能出版社 |
| 43 |
NB/T 20286-2014 |
非能动安全壳冷却系统设计要求 |
Design
requirements of passive containment cooling system |
原子能出版社 |
| 44 |
NB/T 20264-2014 |
非能动堆芯冷却系统设计要求 |
Design
requirements of passive core cooling system |
原子能出版社 |
| 45 |
NB/T 20324-2014 |
非能动堆芯冷却系统定期试验要求 |
Requirements for periodic tests of passive core cooling system |
原子能出版社 |
| 46 |
NB/T 20323-2014 |
非能动安全壳冷却系统定期试验要求 |
Requirements for periodic tests of passive containment cooling
system |
原子能出版社 |
| 47 |
NB/T 20291-2014 |
非能动压水堆核电厂正常余热排出系统设计准则 |
Design
criteria for passive PWR NPP normal residual heat removal system |
原子能出版社 |
| 48 |
NB/T 20381-2016 |
压水堆核电厂化学和容积控制系统设计准则 |
Design
criteria for chemical and volume control system in pressurized water
reactor nuclear power plants |
原子能出版社 |
| 49 |
NB/T 20185-2012 |
压水堆核动力厂厂内辐射分区设计准则 |
Design
criterion of radiation zoning inside of the PWR nuclear power plant |
原子能出版社 |
| 50 |
NB/T 20194-2012 |
压水堆核电厂辐射屏蔽设计准则 |
Design
criterion of radiation shield in the PWR nuclear power plant |
原子能出版社 |
| 51 |
NB/T 20097-2012 |
压水堆核电厂混凝土安全壳功能设计要求 |
Concrete
containment functional design requirements for PWR nuclear power
plant |
原子能出版社 |
| 52 |
NB/T 20429-2017 |
核电厂事故处理规程编写要求 |
Requirements for preparation of emergency operating procedures for
nuclear power plants |
原子能出版社 |
| 53 |
NB/T 20276-2014 |
非能动压水堆核电厂设备冷却水系统设计准则 |
Design
criteria for component cooling system of passive pressurized water
reactor nuclear power plant |
原子能出版社 |
| 54 |
NB/T 20406-2017 |
压水堆核电厂流体系统的安全壳隔离装置 |
Containment isolation device for fluid system of pressurized water
reactor nuclear power plant |
原子能出版社 |
| 55 |
NB/T 20446-2017RK |
压水堆核电厂主蒸汽系统设计要求 |
Main
steam system design requirement of pressurized water reactor nuclear
power plant |
原子能出版社 |
| 56 |
NB/T 20318-2014 |
核电厂安全重要仪表压力变送器 |
Pressure
transmitter important to safety in nuclear power plants |
原子能出版社 |
| 57 |
NB/T 20178-2012 |
压水堆核电厂核取样系统设计准则 |
Design
criteria of nuclear sampling system of pressurized water reactor
nuclear power plant |
原子能出版社 |
| 58 |
NB/T 20188-2012 |
压水堆核电厂重要厂用水系统设计准则 |
Design
criteria for essential service water system for pressurized water
reactor nuclear power plant |
原子能出版社 |
| 59 |
NB/T 20012-2019 |
压水堆核电厂核安全相关混凝土结构设计规范 |
Design
code for nuclear safety related concrete structures for pressure
water reactor nuclear power plants |
原子能出版社 |
| 60 |
NB/T 20011-2019 |
压水堆核电厂核安全相关钢结构设计规范 |
Design
code for nuclear safety related steel structures for pressure water
reactor nuclear power plants |
原子能出版社 |
| 61 |
NB/T 20105-2019 |
核电厂厂房设计荷载规范 |
Load code
for the design of nuclear power plants building structures |
原子能出版社 |
| 62 |
NB/T 20006.15-2019 |
压水堆核电厂用合金钢 第15部分：承压边界用锰-镍-钼钢厚钢板 |
Alloy
steel for pressurized water reactor nuclear power plants-Part 15:
Mn-Ni-Mo steel plates for pressure-retaining boundaries |
原子能出版社 |
| 63 |
NB/T 35079-2016 |
地下厂房岩壁吊车梁设计规范 |
Design
Code for Rock-Bolted Crane Girders in Underground Powerhouses |
中国水利水电出版社 |
| 64 |
NB/T 35007-2013 |
水电工程施工地质规程 |
Geological Code of Construction Period for Hydropower Project |
中国水利水电出版社 |
| 65 |
NB/T 10075-2018 |
水电工程岩溶工程地质勘察规程 |
Specification for Karst Engineering Geological Investigation of
Hydropower Projects |
中国水利水电出版社 |
| 66 |
NB/T 35092-2017 |
混凝土坝温度控制设计规范 |
Design
Code for Temperature Control of Concrete Dam |
中国水利水电出版社 |
| 67 |
NB/T 10074-2018 |
水电工程地质测绘规程 |
Specification for Engineering Geological Mapping
of
Hydropower Projects |
中国水利水电出版社 |
| 68 |
NB/T 10080-2018 |
水电工程陆生生态调查与评价技术规范 |
Technical
Code for Investigation and Assessment of Terrestrial Ecosystem for
Hydropower Projects |
中国水利水电出版社 |
| 69 |
NB/T 35061-2015 |
水电工程动能设计规范 |
Code for
Energy Economy Design of Hydropower Project |
中国水利水电出版社 |
| 70 |
NB/T 35078-2016 |
活塞组合式减压阀基本技术条件 |
Fundamental technical requirements for piston combined pressure
reducing valve |
中国水利水电出版社 |
| 71 |
NB/T 31086-2016 |
风电场工程水土保持方案编制技术规范 |
Technical
Code on Preparation of Soil and Water Conservation for Wind Farm
Projects |
中国水利水电出版社 |
| 72 |
NB/T 31087-2016 |
风电场项目环境影响评价技术规范 |
Technical
Code for Environmental Impact Assessment of Wind Farm Projects |
中国水利水电出版社 |
| 73 |
NB/T 31088-2016 |
风电场安全标识设置设计规范 |
Code for
Design of Wind Farm Safety Signs Arrangement |
中国水利水电出版社 |
| 74 |
NB/T 35041-2014 |
水电工程施工导流设计规范 |
Design
Code of Construction Diversion
for
Hydropower Engineering |
中国水利水电出版社 |
| 75 |
NB/T 35056-2015 |
水电站压力钢管设计规范 |
Design
Code for Steel Penstocks of Hydroelectric Stations |
中国水利水电出版社 |
| 76 |
NB/T 31107-2017 |
低风速风力发电机组选型导则 |
Guide for
Type Selection of Wind Turbine Generator System for Low Wind Speed |
中国水利水电出版社 |
| 77 |
NB/T 35023-2014 |
水闸设计规范 |
Design
Code for Sluice |
中国水利水电出版社 |
| 78 |
NB/T 31105-2016 |
陆上风电场工程可行性研究报告编制规程 |
Preparation Specification for Feasibility Study Report of Onshore
Wind Power Projects |
中国水利水电出版社 |
| 79 |
NB/T 35096-2017 |
水电工程移民安置独立评估规范 |
Code for
Independent Assessment for Hydropower Project Resettlement |
中国水利水电出版社 |
| 80 |
NB/T 32040-2017 |
光伏发电工程劳动安全与职业卫生设计规范 |
Code for
Design of Occupational Safety and Health of Photovoltaic Power
Projects |
中国水利水电出版社 |
| 81 |
NB/T 35102-2017 |
水电工程钻孔土工原位测试规程 |
Specification for Soil Test in Situ in Borehole of Hydropower
Projects |
中国水利水电出版社 |
| 82 |
NB/T 35105-2017 |
水电工程电磁法勘探技术规程 |
Technical
Specification for Electromagnetic Exploration of Hydropower Projects |
中国水利水电出版社 |
| 83 |
NB/T 35106-2017 |
水电工程分标概算编制规定 |
Preparation regulation for sub-bidding budgetary estimate of
hydropower projects |
中国水利水电出版社 |
| 84 |
NB/T 31147-2018 |
风电场工程风能资源测量与评估技术规范 |
Technical
Code for Wind Energy Resource Measurement and Assessment of Wind
Power Projects |
中国水利水电出版社 |
| 85 |
NB/T 35017-2013 |
陶瓷涂层活塞杆技术条件 |
Specification of Ceramic Coated Piston
Rods |
中国水利水电出版社 |
| 86 |
NB/T 35020-2013 |
水电水利工程液压启闭机设计规范 |
Design
Specifications for Hydraulic Hoist in Hydropower and Water Resources
Projects |
中国水利水电出版社 |
| 87 |
NB/T 35039-2014 |
水电工程地质观测规程 |
Specification for Geological Observation of Hydropower Projects |
中国水利水电出版社 |
| 88 |
NB/T 35054-2015 |
水电工程过鱼设施设计规范 |
Design
Code for Fish Passage Facilities in Hydropower Projects |
中国水利水电出版社 |
| 89 |
NB/T 31085-2016 |
风电场项目经济评价规范 |
Code for
Economic Evaluation of Wind Farm |
中国水利水电出版社 |
| 90 |
NB/T 35026-2014 |
混凝土重力坝设计规范 |
Design
Code for Concrete Gravity Dams |
中国水利水电出版社 |
| 91 |
NB/T 35037-2014 |
水电工程鱼类增殖放流站设计规范 |
Code for
the Design of Fish Restocking Station of Hydropower Project |
中国水利水电出版社 |
| 92 |
NB/T 35086-2016 |
水电工程闸门止水装置设计规范 |
Design
Code for Water Sealing Device of Gate in Hydropower Projects |
中国水利水电出版社 |
| 93 |
NB/T 31115-2017 |
风电场工程110kV～220kV海上升压变电站设计规范 |
Code for
110 kV~220 kV Offshore Substation Design of Wind Power Projects |
中国水利水电出版社 |
| 94 |
NB/T 31117-2017 |
海上风电场交流海底电缆选型敷设技术导则 |
Guide for
Selection and Laying of AC Submarine Cables for Offshore Wind Power
Projects |
中国水利水电出版社 |
| 95 |
NB/T 35100-2017 |
水电工程覆盖层预应力锚索技术规范 |
Technical
Code for Prestressed Anchor Cable on Overburden Layer of Hydropower
Projects |
中国水利水电出版社 |
| 96 |
NB/T 42163- 2018 |
小水电机组自并励励磁系统技术条件 |
Technical
specification for self-shunt excitation system of small hydropower
units |
中国电力出版社 |
| 97 |
NB/T 47004.1-2017 |
板式热交换器
第1部分：可拆卸板式热交换器 |
Plate
heat exchangers─Part1: Plate-and-frame heat exchangers |
北京科学技术出版社 |
| 98 |
SY/T 5038-2018 |
普通流体输送管道用直缝高频焊钢管 |
Longitudinal seam HFW steel pipe for common fluid service pipeline |
石油工业出版社 |
| 99 |
SY/T 5037-2018 |
普通流体输送管道用埋弧焊钢管 |
Submerged arc-welded steel pipe for common fluid service pipeline |
石油工业出版社 |
| 100 |
SY/T 6530-2010 |
非腐蚀性气体输送用管线内涂层 |
Internal coating of line pipe for non-corrosive gas transmission
service |
石油工业出版社 |
| 101 |
SY/T 5600-2016 |
石油电缆测井作业技术规范 |
Technical specifications for operation of petroleum wireline logging |
石油工业出版社 |
| 102 |
SY/T 6958-2013 |
低温石油钻机和修井机 |
Petroleum drilling and workover rigs for low temperature conditions |
石油工业出版社 |
| 103 |
SY/T 5038-2018 |
普通流体输送管道用直缝高频焊钢管 |
Прямошовные стальные трубы высокочастотной сварки для трубопроводов
транспортировки нормальных жидкостей |
石油工业出版社 |
| 104 |
SY/T 5037-2018 |
普通流体输送管道用埋弧焊钢管 |
Cтальные трубы дуговой сварки под флюсом для трубопроводов
транспортировки нормальных жидкостей |
石油工业出版社 |
| 105 |
SY/T 6266-2004 |
低压玻璃纤维管线管和管件 |
Стекловолоконные трубопроводные трубы и фитинги низкого давления |
石油工业出版社 |
| 106 |
SY/T 6530-2010 |
非腐蚀性气体输送用管线内涂层 |
Внутреннее покрытие трубопроводных труб для транспортировки
некоррозионного газа |
石油工业出版社 |
| 107 |
SY/T 6958-2013 |
低温石油钻机和修井机 |
Нефтяные буровые установки и агрегаты для ремонта скважин в
низкотемпературной среде |
石油工业出版社 |
| 108 |
SY/T 6666-2017 |
石油天然气工业用钢丝绳的选用和维护的推荐作法 |
Рекомендуемая методика по выбору и
обслуживанию стальных канатов для нефтегазовой промышленности |
石油工业出版社 |
| 109 |
SY/T 6270-2017 |
石油天然气钻采设备 固井、压裂管汇的使用与维护 |
Нефтегазовое бурильно-добывающее оборудование
Использование и техническое обслуживание манифольдов для
цементирования скважины и гидравлического разрыва пласта |
石油工业出版社 |
| 110 |
SY/T 5557-2016 |
石油天然气钻采设备 固井成套装备 |
Нефтегазовое бурильно-добывающее оборудование
Комплектное цементировочное оборудование |
石油工业出版社 |
| 111 |
SY/T 5079-2014 |
油井测试设备 |
Оборудование для каротажа и испытания
нефтяных скважин |
石油工业出版社 |
| 112 |
SY/T 6637-2018 |
天然气输送管道系统能耗测试和计算方法 |
Energy consumption test and calculation method for natural gas
pipeline system |
石油工业出版社 |
| 113 |
SY/T 5391-2018 |
石油地震数据采集系统通用技术规范 |
General technical specification of the petroleum seismic data
acquisition system |
石油工业出版社 |